Turbine Flow Meter Water Fuel Flow K24 DN25 Water Meter Electronic Turbine Flow Meter Sensor for Urea Kerosene Gasoline Water

2,242.002,596.00 (Inclusive of GST 18%) (-14%)

In stock


The control panel of chemical flowmeter adopts modular design, with complete functions, simple structure and convenient operation. It can be widely used in petroleum, chemical, pharmaceutical, transportation, food industry and commerce.

Set the unit of measurement:

Press the MENU + RESET key for 5 seconds at the same time in the standby state or the current filling amount display state. Enter the unit conversion setting, press the RESET button, and then press LTR → GAL → PT → QT → LTR to select the measurement unit, and the cumulative filling amount is displayed after the current measurement unit is converted. Press the MENU button for 3 seconds to exit the unit conversion setting


  • Size : DN25 ( 1 inch)
  • Medium: methanol, diesel, kerosene, chemical liquid, urea water.
  • Length: 103MM
  • Measurement accuracy: ± 1%
  • Repeatability: ± 0.5%
  • Maximum working pressure: 2BAR
  • Working voltage: 2.3-3.3V
  • Standby time: 2 years
  • Flow range: 10-120L / MIN
  • Single count: 0.00-999.9
  • Cumulative total: 0.00-999999.9
  • Units: L / L, gal / GAL, pint / PTS, quart / QTS
  • Single measurement has been cleared: RESET

Note: 1. This product requires 2 AAA batteries, which is more convenient for you to use. This product comes with 2 AAA batteries to replace the battery 2. Low battery warning 3. When the battery voltage is 2.2V to 2.4V, LBat is displayed to remind the user to replace the battery.

Watch Cube60-PRP – VIDEO 


BULK QTY PRICES - to save more!!!

Bulk Quantity Price per piece
1 - 10 2,242.00
11 - 20 2,183.00
21 - 50 2,124.00
51+ 2,065.00

Product description:

K24 is a diversified low-cost flow meter suitable for AdBlue measurement. Using a unique turbine mechanism, the flowmeter can operate accurately when installed near the pump or behind the nozzle.
Product Details
Know K24 electronic digital meter with turbine measuring system, designed for accurate measurement of low-viscosity fluids. It uses two macro groups: 1. The main body is made of light-colored non-conductive plastic material, designed for water/urea solution 2. The main body is made of dark conductive plastic material (evaluation resistance: 50 ohm), designed for diesel, water and windshield fluid.
Inline Turbine Meter

Polyamide Body

Polypropylene Internals
Viton Seals
Stainless Steel Shaft
Flow Range:
20~120 litre/min
Pressure (max):
20 Bar
Temp Range:
-10°C to +50°C
1″ BSP (M/F)

5 Digit Reset (10mm)

6 Digit Non-Reset (6mm)
0.1 litre

2x 1.5v ‘AAA’

18 ~ 36 months
Applicable Scenario
It can be used with oil pipes, combined self-sealing automatic jumping guns, metered fuel guns, etc., mostly used for diesel, gasoline, kerosene, methanol, water, etc.

Additional information

Size (mm) :

Design :

Single Jet



Media :

Cold & Hot Water

Battery life

12 Years

Calibration Life

6 Years

Protection :



3 Years against any manufacturing defects

Connection :

Screwed Ends

Body :



Brass Nut / Nipple/Washer

Data Reading

Mobile App : Android / IOS

Transmission Range

10 Meters

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)

    Your Cart
    Your cart is emptyReturn to Shop

    Main Menu

    Turbine Flow Meter Water Fuel Flow K24 DN25 Water Meter Electronic Turbine Flow Meter Sensor for Urea Kerosene Gasoline Water

    2,242.002,596.00 (Inclusive of GST 18%) (-14%)

    Add to Cart