Subtotal:
₹8,500.00
Turbine Flow Meter Water Fuel Flow K24 DN25 Water Meter Electronic Turbine Flow Meter Sensor for Urea Kerosene Gasoline Water
Roll over image to zoom in
₹2,242.00₹2,596.00 (Inclusive of GST 18%) (-14%)
Description:
The control panel of chemical flowmeter adopts modular design, with complete functions, simple structure and convenient operation. It can be widely used in petroleum, chemical, pharmaceutical, transportation, food industry and commerce.
Set the unit of measurement:
Press the MENU + RESET key for 5 seconds at the same time in the standby state or the current filling amount display state. Enter the unit conversion setting, press the RESET button, and then press LTR → GAL → PT → QT → LTR to select the measurement unit, and the cumulative filling amount is displayed after the current measurement unit is converted. Press the MENU button for 3 seconds to exit the unit conversion setting
Specification:
- Size : DN25 ( 1 inch)
- Medium: methanol, diesel, kerosene, chemical liquid, urea water.
- Length: 103MM
- Measurement accuracy: ± 1%
- Repeatability: ± 0.5%
- Maximum working pressure: 2BAR
- Working voltage: 2.3-3.3V
- Standby time: 2 years
- Flow range: 10-120L / MIN
- Single count: 0.00-999.9
- Cumulative total: 0.00-999999.9
- Units: L / L, gal / GAL, pint / PTS, quart / QTS
- Single measurement has been cleared: RESET
Note: 1. This product requires 2 AAA batteries, which is more convenient for you to use. This product comes with 2 AAA batteries to replace the battery 2. Low battery warning 3. When the battery voltage is 2.2V to 2.4V, LBat is displayed to remind the user to replace the battery.
Watch K24 Flow Meter – VIDEO
CLICK TO ORDER ON WHATSAPP
Product description:
K24 is a diversified low-cost flow meter suitable for AdBlue measurement. Using a unique turbine mechanism, the flowmeter can operate accurately when installed near the pump or behind the nozzle.
Product Details
Know K24 electronic digital meter with turbine measuring system, designed for accurate measurement of low-viscosity fluids. It uses two macro groups: 1. The main body is made of light-colored non-conductive plastic material, designed for water/urea solution 2. The main body is made of dark conductive plastic material (evaluation resistance: 50 ohm), designed for diesel, water and windshield fluid.
Specification
|
||
Type:
|
Inline Turbine Meter
|
|
Materials:
|
Polyamide Body Polypropylene Internals
Viton Seals
Stainless Steel Shaft
|
|
Flow Range:
|
20~120 litre/min
|
|
Accuracy:
|
±1%
|
|
Pressure (max):
|
20 Bar
|
|
Temp Range:
|
-10°C to +50°C
|
|
Connections:
|
1″ BSP (M/F)
|
|
Display:
|
5 Digit Reset (10mm) 6 Digit Non-Reset (6mm)
|
|
Increments:
|
0.1 litre
|
|
Protection:
|
IP65
|
|
Power:
|
2x 1.5v ‘AAA’ 18 ~ 36 months
|
Applicable Scenario
It can be used with oil pipes, combined self-sealing automatic jumping guns, metered fuel guns, etc., mostly used for diesel, gasoline, kerosene, methanol, water, etc.
Additional information
Weight | 0.5 kg |
---|---|
Dimensions | 15 × 12 × 10 cm |
Accuracy | 1.0% |
Size | DN25 |
Material | PPS |